Click-Clack in step off position (click on to enlarge)
|
Click-Clack in step on position (click on to enlarge)
|
Click-Clack in step on position, powder or ice is not a proble it works
any time ! (click on to enlarge)
|
Click-Clack in step on position: faster and lighter !
Thanks to Paola for enjoy Click-Clacks !
(click on to enlarge)
|
|
|
News! 31-07-2006.
4mm
PINS UPGRADE: since many skiers want to use the Click-Clack
in the higer position a new bigger special pins was created. The upgrade is
possible on all the Click-Clack with a simple drilling work. The new pins
are available for free for all the customer !
CLICK
HERE TO DOWNLOAD PDF FILE
|
|
Last news :
(picture of the first prototype)
|
CLICK-CLACK
3 STEP is born. Request from many skiers who normally use higher
2 position is now available.
Two lever for 3
position with ski pole touch !
Live the binding in
the same position, just touch the lever to obtain zero step, medium step or
higher.
Spring driven have
the same weight of the original metal Comfort top plate.
Witch one for you
? The normal Click-Clack is indicated for racers, young &
rapid skiers, that normally use just zero and medium step. THE HIGHER
POSITION IS POSSIBLE TOURNING THE BINDING BUT JUST FOR FEW NUMBER OF STEPS.
CLICK-CLACK
3 STEP is indicated to all the skiers that normally prefer
steep climbing continuosly on the 2 higher position.
|
|
|
1- With the new RACE
antitwist plate the Click-Clack is now compatible with Dynafit
RACE bindings serie !
The new plate is
installed behind the rear Bindings.
News! 16-06-2006.
2- Titanium antitwist
plate available for all serie !
|
Click on to enlarge
|
News! 07-06-2006.
With the new Confort
antitwist plate the Click-Clack is now compatible with Dynafit
Confort bindings serie !
Replace the plastic
hook with the Confort antitwist inox plate.
|
|
|
CLICK-CLACK (P)
PATENTED STEP:
Build to be used on the Dynafit bindings
instead of the original plate permit the mouvement
of the step lever just with a stick touch. Up and Down in a second in stand
position !!!
Why
Click-Clack:
Since I was a child I goes around on the
mountain asking more from my tech. devices.
Dynafit bindings become in a very short time one
of the best bindings, but much more can be done. After one year of
prototype and test on the Alps Click-Clack series was born as you can see
now.
Color High Res Alu Click-Clack can be asked, also Laser-printed with
Your Name !
|
|
Click-Clack@work
|
Click-Clack_3Step@work
|
WHERE CAN BE INSTALLED:
You can install Click-Clack on your Dynafit back bindings.
HOW CAN BE INSTALLED ON:
RemovE
the old plate and use the same 4 screws to lock it. Be attention to not
dismount the bindings pushing all the time the cover plate with a finger.
|
|
1°
level Just with the ski pole !
|
1° level Just with the ski pole !
|
HOW IT WORKS:
- Just turn the bindings in free position
before start the slope.
- Touch the Click-Clack lever from the top to use the step ON
- Touch the Click-Clack lever from the bottom to use the step OFF
The
3 STEP permit also to have the 2° level with a ski pole touch !
ALL THE MANOUVER CAN BE DONE EASY IN ONE SECOND AND IN A STAND POSITION !
|
|
2°
level Needs tourning.
|
2° level Just with the ski pole !
|
MAXIMUM STEP:
In case of extreme slope you can tourn the bindings and use the Click-Clack in the
higher step position.
COLORS AND YOUR NAME PRINTING:
Normally is original alu-grey,
but can be colored in orange-grey and your name
can be laser written.
|
|
|
WEIGHT:
10gr less then the original plate on TLT Speed
!
More
than 40gr less on the Blu series !
Save time and forces, use Click-Clack
!
|
Please verify at the securecode page the
laserwritten "Snow Cat in action" logo, and the serial number printed
on !
|
In the kit for you'll find:
n.2 Click-Clack step for TLT
Speed series
n.2 Anti-twist plate (must be requested SPEED or CONFORT !)
n.4 Inox screws
n.1 Installation ad use manual
The two antitwist plate must be
installed insthead of the skistopper and are necessary in case of steep
slope crossing. Whitout this the bindings sometimes can turn locking the
boot. This is the only one reason that we prefer Speed series from all the
others TLT bindings.
|
|
Press
relese from our US&Canada distributor:
1) Just
updated our www.randogear.com site with the Click-Clacks
and sent out a bunch of press releases:
Press Release
Big Mountain
Sports, Inc., owner of www.randogear.com , is
proud to announce that it has been chosen as the North American Distributor
of the Maruelli Click-Clack ultralight
climbing post upgrade for use with Dynafit
bindings. The Click-clack is available
for wholesale distribution to select dealers of backcountry ski gear or for
retail sales directly to consumers. The
retail price will be $140 US.
Replacing the
top heel plate and climbing post on past and current models of Dynafit bindings, the Click-Clack allows the user to
move from flat touring mode to the mid-elevation mode by easily clicking a
spring-loaded lever and without turning the binding to a new position. This allows for faster transitions
between modes and provides a longer life for the expensive and difficult to
replace bushings within the binding itself.
It also saves weight over the factory equipped “volcano”-style lever
and is more durable. Machined from
Aircraft grade aluminum, each pair is thoroughly
tested and stamped with a serial number for quality control. The plate also features a high-elevation
mode that is as high or higher than the stock
binding, giving the user the ability to climb in steep terrain.
Ken Sim
CLICK-CLAK
FORUM ON:
If
you wanna know what the peoples think of the Click-Clack you can visit:
1)
www.wildsnow.com
http://www.wildsnow.com/277/click-clack-dynafit-aftermarket-heel-unit-review/
2-
www.telemarktalk.com
http://www.telemarktalk.com/phpBB/viewtopic.php?p=294123#294123
1-
Couloir on line
http://www.backcountryworld.com/showthread.php?p=18592#post18592
|
